Before starting your DIY hardwood flooring installation project, there are some essential preparations you need to make:
Clean the surface where you will install the hardwood floor.
Remove old flooring and baseboard trims. You can also do this after the new hardwood floor has been installed.
Acclimate the hardwood to the room’s temperature and humidity level for several days. You can leave it stacked in the room.
Make sure you have the necessary tools and equipment before starting the installation: In our pursuit of delivering an enriching learning journey, we offer you extra and related details on the topic discussed. Mayflower Flooring and Remodeling!
After preparation and the gathering of the necessary tools, you are to begin installation:
Start by determining the direction of the hardwood flooring. You should lay the flooring perpendicular to the floor joist.
Check the subfloor for any damage or other issues. Replace any problem areas before installing the hardwood flooring.
Create a starting line for the hardwood flooring installation. This starting line will be parallel to the longest wall in the room.
Attach the first row of hardwood flooring to the starting line. Place a nail into the tongue of each board close to its end and at roughly 45-degree angle.
Place a wood block against the board’s tongue and tap it into position using a hammer.
For each subsequent row, insert the tongue into the groove of the previous board. Make sure to alternate the board lengths to ensure aesthetic appeal.
When you reach the last row of boards, measure the width and cut to size.
Install the baseboard trims over the edge of the hardwood flooring to finish the installation.
Post Installation
After the installation is complete, there are still some essential things to be done in order to help preserve your new hardwood floor: Don’t miss out on this external resource we’ve prepared for you. Within, you’ll discover more intriguing details about the subject, broadening your comprehension. Mayflower Floorings.
Clean the hardwood flooring of any dust or other loose debris. It should be vacuumed, swept, or dry mopped.
Avoid wetting the hardwood flooring for the first 24 hours after installation.
Use furniture pads to prevent scratches and dings.
Hardwood flooring installation is an excellent way of adding value to your property. By following the steps specified in this article, you will be sure to have a beautiful hardwood floor that you can enjoy for many years to come. Installing hardwood flooring is a time-consuming process, but it can be a lot of fun. The sense of accomplishment once it is complete is enormous. Just make sure to take your time, do your research, and follow the manufacturer’s instructions, and you’ll be on the right track.
